⏱ 4 min read  ·  ✅ Updated Nov 2026

A kitchen chimney, also called a range hood, pulls smoke, steam, grease and cooking odors away from your cooking area. To choose one, match the type to your kitchen layout, size it to your cooktop, and think hard about filters and ducting because they affect performance and upkeep.

Quick Picks by Need

Need Type to look at
Standard wall-mounted cooktop Wall-mounted chimney hood
Cooktop on an island Island chimney that hangs from the ceiling
Heavy oil-based frying Baffle filter hood with strong suction
No external vent possible Recirculating hood with carbon filters
Small or modern kitchen Slim, built-in or under-cabinet model

Types of Kitchen Chimneys

Wall-mounted chimneys are the most common. A flue runs up to the ceiling or an exhaust duct and the hood canopy sits over the hob. Island versions are similar but must be mounted from above and are exposed on all sides, so they usually need stronger extraction.

Built-in or slim designs tuck into cabinetry and suit minimalist kitchens, though they can offer less capture area. Choose based on your layout and how much visual presence you want.

Size, Suction and Placement

The hood should be at least as wide as your cooktop, and wider is better for catching rising fumes. Mount it at the height recommended in the manual, because too high a hood captures less and too low a hood can be a safety or comfort problem.

Suction power is usually quoted as an airflow rate. Larger kitchens, gas hobs and heavy frying need more extraction than occasional light cooking. Avoid assuming the highest number is always best: extreme power can be noisy and, in a tightly sealed home, may require a make-up air supply.

  • Match hood width to hob width or go larger.
  • Choose stronger extraction for open-plan kitchens.
  • Check the duct diameter your chosen model requires.

Filters, Ducting and Recirculation

Filters are the heart of upkeep. Baffle filters, usually stainless steel, trap grease and can often be washed in a dishwasher or by hand. Mesh filters work but clog faster. Charcoal or carbon filters are used in recirculating hoods to absorb odors, and they need regular replacement.

A ducted hood vents air outside and generally removes smoke, moisture and heat more effectively. Keep the duct run short and straight, with few bends, to retain performance. A recirculating hood is easier to install where ducting is impossible, but it only filters the air rather than removing it.

Noise, Lighting and Controls

Manufacturers publish noise levels in decibels, but real impressions depend on duct layout and room acoustics. Look for multiple speed settings so you can run it quietly for simmering and at full power for searing.

  • LED lights improve visibility over the hob.
  • Touch or button controls: pick what is easiest to clean.
  • Auto-clean or timer functions are convenient but not essential.

Common Mistakes to Avoid

  • Buying a hood narrower than the cooktop.
  • Ignoring ducting limits and discovering that the chosen model needs a larger duct than your wall allows.
  • Forgetting filter replacement and cleaning costs.
  • Choosing style over function and getting a hood that captures little.

Installation and Everyday Use

A hood only works as well as its installation. Measure the height between the hob and the hood according to the manufacturer’s guidance, and check that the wall or ceiling can support the weight. Duct runs should be as short and straight as possible, because every bend and long stretch reduces airflow.

Make-Up Air

When a strong hood exhausts air, the house needs to draw replacement air from somewhere. In tightly sealed homes, a powerful hood may need an opening or a make-up air system. Ask a qualified installer if you are unsure whether your home needs one.

Cooking Habits That Help

Turn the hood on before you start cooking and leave it running for a few minutes afterward so lingering steam and odors are cleared. Use the rear burners when possible, since hoods capture best near the back of the cooktop. Cover pans when you can to limit grease spatter.

Maintenance Schedule

Set a reminder to wash filters. Soak metal filters in hot soapy water or use the dishwasher if the manual allows, and let them dry fully before refitting. Replace carbon filters on the schedule suggested for your model. Wipe the hood’s exterior with a non-abrasive cleaner appropriate for its finish, whether stainless steel, glass or painted metal.

Warranty and service availability are also worth checking before you buy, because motors and control boards can be costly to repair. Keeping the manual and model information somewhere accessible makes future service or part replacement much easier.

Frequently Asked Questions

How often should I clean the filters?

Check the manual. Heavy frying means more frequent cleaning, while light cooking can stretch the interval. Greasy filters reduce performance and can be a fire risk.

Is a ducted or recirculating hood better?

Ducted hoods usually remove moisture and heat better. Recirculating is a practical fallback where venting is not possible.

Can I install a chimney myself?

Mounting and electrical work vary. If you are unsure, hire a qualified installer, especially for ducting and wiring.

Do I need a chimney for an electric cooktop?

Even electric cooking creates steam, grease and odors, so a hood still helps, though demands are usually lower than for gas.

Final Thoughts

Pick a chimney that fits your cooktop and layout, favor ducted venting when possible, and choose filters you will actually maintain. A well-chosen hood keeps the kitchen cleaner and more comfortable every time you cook.