Extractor hoods are sold under many names, but the job is the same: pull steam, grease and cooking smells away from the room. Picking the right one comes down to extraction power, ducting, noise and how well it suits your hob and layout. This guide covers the choices in plain terms.
Quick Picks by Need
- Heavy daily cooking: a ducted extractor with strong extraction power and a low-noise motor.
- Rented or ductwork-free homes: a recirculating extractor with carbon filters.
- Low ceilings or small kitchens: a slimline or canopy extractor that sits neatly under a cabinet.
- Open-plan living: a quiet model with a good lighting setup and clean design.
- Island hobs: a ceiling-mounted or downdraft extractor suited to island use.
Extraction vs Recirculation
An extracting model vents air outside through ducting, taking moisture and heat with it. A recirculating model passes air through filters and returns it to the room, which improves odors and grease but does not remove humidity. If you can install ducting with a short, straight route, extraction is usually more effective. Where that is impossible, recirculation with regularly replaced carbon filters is a sensible compromise.
Extraction Rate and Room Size
Manufacturers publish extraction rates, and you can compare them across models. A general rule is that larger kitchens, open-plan rooms and powerful hobs benefit from stronger extraction. Remember that real-world performance drops with long duct runs and bends, so give yourself some headroom rather than choosing the bare minimum.
- Match the width of the extractor to the hob or go slightly wider.
- Consider boost settings for frying and quiet settings for simmering.
- Check that the duct diameter matches the connection on the hood.
Noise, Filters and Controls
Noise ratings are worth checking, since a loud extractor tends to go unused. Metal grease filters are often dishwasher-safe, and carbon filters in recirculating models need periodic replacement according to the maker’s guidance. Controls can be push-button, touch or remote, and features like timers and filter reminders help keep things maintained.
LED lights over the hob are an everyday benefit, giving clear sight of the pan without glare.
Style and Fitting
Common styles include chimney, canopy, integrated, island and downdraft. Chimney hoods make a visual statement, integrated models hide inside cabinetry, and downdraft units rise from the worktop when needed. Check the clearance above the hob specified in the instructions, and be sure your wall or ceiling can support the weight, especially for island models.
Fitting is best done by a qualified installer, particularly where ducting and wiring are involved.
Common Mistakes
- Choosing a unit that is narrower than the hob.
- Using long, narrow or heavily bent ducting.
- Neglecting filter cleaning or replacement.
- Prioritizing looks over noise and extraction.
- Forgetting that powerful extraction needs adequate air replacement in the room.
Looking After Your Extractor
Regular care keeps an extractor effective and safe. Grease-laden filters slow airflow and can be a fire risk, so clean them on a regular schedule. Most metal filters can be washed in hot soapy water, and some are dishwasher-safe, but check the manual first. Wipe the outside with a mild degreaser and avoid abrasive pads that scratch stainless steel.
For recirculating models, keep a note of when carbon filters were installed. They cannot be washed and must be replaced when saturated, and a neglected filter simply stops removing odors. If you notice weak airflow, vibration or unusual noise, have the ducting and motor checked.
Planning for Room Layout
In open-plan homes, sound travels, so choose a quiet motor and consider soft closing or remote controls. Position the extractor so that it captures steam from every ring or zone on the hob. If your hob sits on an island, make sure the ceiling can support the unit and that cables and ducting are routed cleanly. A neat installation looks better and performs better.
Understanding Specifications
Spec sheets list extraction rate, noise levels, duct diameter and the type of filters used. Compare these side by side rather than relying on marketing language. A model that looks similar in photos may differ greatly in how quietly it runs or how easily its filters come out for cleaning.
Pay attention to the depth and projection of the unit, which affect headroom above the hob and how easily you can reach rear rings. Check that the controls are intuitive, and that the lights cover the whole cooking area evenly.
Working With Installers
Share your hob type, ceiling height and planned duct route with your installer early. They can confirm whether the hood suits the space and whether wall reinforcement or cabinetry changes are needed. Ask about condensation traps and non-return valves for ducting, since they help protect the unit and your walls over time.
Frequently Asked Questions
Are extractor hoods worth having over an induction hob?
Yes. Induction still produces steam, grease and odors from the food itself, so extraction remains useful.
How often should filters be washed?
Check regularly and wash metal filters when they show grease build-up, following the manufacturer’s advice.
Can I vent into the loft or ceiling void?
That is generally not advised, because moisture and grease can cause damage. Venting outside is the safe route.
Is a recirculating extractor effective?
It helps with grease and smells when carbon filters are kept fresh, but it does not remove heat or humidity.
Final Thoughts
Choose extraction where you can, recirculation where you must, and size the unit to your hob and room. Pay attention to noise and filter care, and the extractor will serve you well.
Write Your Review
No reviews yet. Be the first to share your experience!