A pellet smoker tube is a perforated metal tube you fill with wood pellets and light, so it smolders and releases smoke for hours. It is a simple way to add smoke flavor to pellet grills, gas grills, and electric smokers that produce little on their own. Here is how to compare tubes and use them well.
Quick Picks by Need
| Need | Type to look for |
|---|---|
| Pellet grill with mild smoke | Standard round or hex tube in stainless steel |
| Long cooks | Longer tube with a larger pellet capacity |
| Small smokers or cold smoking | Compact tube or mesh maze that fits tight spaces |
| Stable placement | Hexagonal tube that resists rolling |
| Easy lighting | Tube with open ends and wide perforations |
How a Smoker Tube Works
You fill the tube with pellets, light one end with a torch or lighter, and let it burn for a minute or two. Then you blow out the flame so the pellets smolder. The perforations let air through, producing thin smoke as the pellets burn along the tube. You place it inside the cooker, near the food but away from direct flame.
This supplements the smoke your grill makes. It is especially useful at higher temperatures, where pellet grills often produce less smoke.
Shapes and Sizes
Round and hexagonal tubes
Round tubes are common and simple. Hexagonal ones sit flat and are less likely to roll on the grate. Check the perforation pattern, since larger or more numerous holes improve airflow but may burn pellets faster.
Mesh mazes
Mazes are flat, snake-shaped trays that you fill and light at one end. They can burn for a long time in a small footprint and are good for cold smoking cheese or fish if you can keep the temperature low.
Length
Longer tubes hold more pellets and run longer. Choose based on your cooker’s interior and cook length. A very long tube may not fit smaller cookers.
Materials and Construction
Stainless steel resists rust and handles heat. Check the weld quality, the strength of the mesh, and the end caps. Thin metal may warp. A well-made tube can be reused many times with simple cleaning.
Choosing Pellets
Use food-grade hardwood pellets. Fruit woods are mild and suit poultry and pork, while hickory, oak, and mesquite give a stronger flavor. Keep pellets dry, as damp pellets smolder poorly and go out. Fill the tube firmly but not too tight, so air can pass.
Safe and Effective Use
- Place the tube on a stable, non-flammable surface inside the cooker.
- Use a torch or lighter carefully, and wear heat-resistant gloves.
- Do not use accelerants.
- Ensure the cooker is ventilated and set up outdoors.
- Let the tube cool fully before handling or emptying.
Cleaning and Storage
Tap out leftover ash, brush the mesh, and let the tube dry. Store it in a dry place. If the tube becomes clogged with residue, scrub it with a stiff brush.
Common Mistakes
- Overpacking the tube so air cannot flow.
- Using damp pellets.
- Not blowing out the flame after lighting.
- Placing the tube too close to the grill’s fire pot.
Where to Place the Tube
Position the tube on the grate away from direct flame, and near the side that gets the best airflow. On a pellet grill, many cooks place it opposite the fire pot. On a gas grill, put it on the cool side of the cooking area. Make sure the tube is secure and cannot roll into food or burners.
Experiment with placement over a few cooks to see how it affects smoke levels and flavor.
Foods That Benefit Most
Cheese, salmon, nuts, and sausages take smoke well when cooked at lower temperatures. Chicken, pork ribs, and brisket can also benefit, especially when the grill is set high. Milder woods are best for delicate foods, and stronger ones for beef. Keep a record of what you used so you can repeat the best results.
Troubleshooting a Tube That Will Not Stay Lit
If your tube goes out, check the pellets first. Damp or old pellets smolder poorly. Make sure the tube is packed firmly enough to burn but loose enough for airflow. Light the end for longer, until you see a steady ember, before blowing out the flame.
Airflow matters, too. If the cooker is tightly sealed with little ventilation, the tube may starve for oxygen. Open a vent slightly, and place the tube where air moves across it. Strong drafts can also blow it out, so find a balance.
Keep the tube clean. Residue and ash buildup block the perforations, so brush it out between uses. With a little practice, you will find the combination of pellets, placement, and airflow that works for your cooker.
Frequently Asked Questions
How long does a tube burn?
It depends on length, pellet type, airflow, and temperature. Check the manufacturer’s guidance and observe your own results.
Will it make food taste too smoky?
It can if you overdo it. Start with shorter bursts and adjust to taste.
Can I use it in a gas grill?
Yes, as long as there is space and airflow. Place it away from direct flame.
Does it replace the pellet grill’s smoke?
It supplements it, boosting the smoke level rather than replacing the cooker’s fire.
Final Thoughts
Select a sturdy, appropriately sized tube, load it with dry pellets, and light it carefully. Used with moderation, a smoker tube adds a deeper smoke flavor to your grill’s cooking.
Write Your Review
No reviews yet. Be the first to share your experience!