⏱ 10 min read  ·  ✅ Updated Nov 2026

A sharp knife does its best work when your hand feels calm. A mandoline slices fast, and a box grater can catch a knuckle on the final pass. Cut-resistant gloves sit between your skin and the blade, letting you hold food firmly while the edge does its job. This guide compares five gloves, explains the ratings, and helps you pick the right pair.

Our top pick: Microplane Cut-Resistant Glove. Runner-up: NoCry Premium Cut-Resistant Gloves.

What Cut Resistance Ratings Mean

Two rating systems appear on most glove listings. EN388 is the European standard, and its cut score runs from A to F under the current test, with older listings still showing a Level 1 to Level 5 scale. Level 5 on the older scale marks serious protection against a sharp blade drawn across the fabric. ANSI is the North American standard, and its cut levels run from A1 to A9. A2 covers light kitchen duty, A4 and A5 cover most home cooking, and A9 is the top of the scale.

A higher number is not always better. The toughest gloves are thicker, stiffer, and warmer, which makes fine knife work harder, and a bulky glove can make you grip harder and slip more. Most home cooks land in the middle: EN388 Level 5 or ANSI A4 to A5 gives real protection against a mandoline blade or a slipping knife while keeping enough feeling to work with control. HPPE, the light fiber behind most kitchen gloves, is often blended with glass fiber or steel thread, while a nitrile palm adds grip on wet food.

How to Choose the Right Pair

Fit comes first. A glove that is too loose will bunch under your palm and slide on a knife handle, while a glove that is too tight will tire your hand during a long session of chopping. Most makers sell sizes from extra small to extra large, and some offer a single one-size design that stretches to fit many hands. Measure around your knuckles, check the size chart, and aim for a snug fit.

Think about which hand needs protection. Most cooks wear the glove on the food hand, while the knife hand stays bare for control. Ambidextrous gloves work on either hand, which helps when you switch tasks or share the glove. Check food safety too: the glove should be food-grade, free of coatings that flake into food, and machine washable. Finally, match the glove to the task: thin and flexible for the mandoline, tougher with a reinforced palm for heavy chopping, and grippy for oyster shucking.

1. Microplane Cut-Resistant Glove

Microplane built its name on ultra-sharp graters, so its cut-resistant glove is a natural fit for the kitchen. This single ambidextrous glove comes in a soft grey knit, sized to fit most adult hands, and it is designed for grating, mandoline slicing, and fine prep work. The wire-free knit blends high-performance fibers into a thin, flexible fabric. It is rated EN388 Level 5 and ANSI Level 4, it is food-safe and free of BPA, and it is machine washable. On a mandoline it shines: hold a small piece of cucumber or a wedge of potato firmly against the blade and push it through, and the thin knit keeps enough feeling to judge thickness and pressure.

Specs
– ASIN: B001QXZORE
– Protection: EN388 Level 5, ANSI Level 4
– Material: Wire-free knit of polyethylene, polyamide, glass fiber, and elastane
– Fit: One size, ambidextrous, fits either hand
– Food safety: FDA compliant, BPA free
– Care: Machine washable, hang to dry
– Best for: Mandoline slicing, grating, zesting, and fine prep

2. NoCry Premium Cut-Resistant Gloves

NoCry is a widely sold glove brand for home kitchens, and the Premium model is its most popular pick. It is sold as a pair in four sizes from small to extra large, so you can pick a close fit instead of settling for one size. The grey knit is made from ultra-high-molecular-weight polyethylene, glass fiber, and spandex, a blend that the maker describes as four times stronger than leather, and the glove carries an EN388 Level 5 rating with ANSI certification. The sized fit is the main advantage: a glove in your exact size stays put during long prep sessions, and the stretchy spandex helps it hug the hand. The gloves are food-grade and machine washable, and the pair format lets you protect both hands for tasks like oyster shucking or breaking down poultry. They are light enough for daily chopping, with enough confidence on a mandoline to use the last bit of a vegetable.

Specs
– ASIN: B00W5DMX3C
– Protection: EN388 Level 5, ANSI certified
– Material: Ultra-high-molecular-weight polyethylene, glass fiber, spandex
– Fit: Four sizes, small to extra large, ambidextrous pair
– Food safety: Food-grade materials
– Care: Machine washable
– Best for: Everyday chopping, mandoline work, oyster shucking, and shared kitchens

3. Schwer ProGuard PR3326

Schwer takes a different approach: maximum protection first. The ProGuard PR3326 is rated ANSI A9, the highest level on the ANSI cut scale, and it uses a blend of high-performance polyethylene and metal wire yarns to reach that rating. The 13-gauge knit keeps it thinner than many heavy work gloves, and the palm coating grips wet and dry surfaces. A reinforced thumb adds durability where gloves usually wear out first, and the glove is touchscreen compatible. Pick this glove when the job involves real force: breaking down a large squash, cutting a tough root vegetable, or handling a cleaver. The trade-off is bulk. An A9 glove is heavier and stiffer than a thin kitchen glove, and it gives less feeling in the fingertips, so it is not the best pick for delicate mandoline work. Think of it as the heavy-duty option in the drawer, for the hardest jobs in the kitchen.

Specs
– ASIN: B09GTYVJ58
– Protection: ANSI A9, highest ANSI cut level
– Material: High-performance polyethylene and metal wire yarns, 13-gauge knit
– Fit: Sized, single pair, reinforced thumb
– Grip: Non-slip palm coating, touchscreen compatible
– Care: Breathable knit, PFAS free
– Best for: Heavy chopping, cleaver work, tough squash and root vegetables

4. Dowellife Cut-Resistant Gloves

Dowellife is the value pick: solid protection without a complicated feature list. The glove is rated EN388 Level 5, which puts it in the same protection class as the top kitchen gloves, and it is made from a food-grade HDPE knit that is safe for direct contact with ingredients. It is sold as a single pair in a large size, with a simple grey design and no coating on the palm, which keeps the glove light and breathable. Without a coating, the glove stays cool and flexible, and it feels closer to a bare hand, which suits long prep sessions and tasks where you need to feel the food. The downside is grip: on wet food like tomatoes or raw meat, a bare knit palm can slip, so you may need to dry the food or the glove before a tricky cut. The gloves are machine washable, and the maker lists oyster shucking, fish fillet work, mandoline slicing, and meat cutting as intended uses.

Specs
– ASIN: B06XBGR2L9
– Protection: EN388 Level 5
– Material: Food-grade HDPE knit
– Fit: Single pair, large size
– Food safety: Food-grade materials
– Care: Machine washable
– Best for: Everyday slicing and dicing, dry prep, and a budget-friendly spare pair

5. DEX FIT Cru553

The Cru553 brings a work-glove design into the kitchen, and it is the most dexterous glove in this guide. It is rated Level 5 under EN388 and ANSI A5, and it uses a 3D comfort fit that shapes the glove to the natural curve of the hand. The palm and fingers carry a foam nitrile coating that the maker calls Power Grip, and the coating gives a firm hold on wet, oily, and dry surfaces alike. The fingertips are touchscreen compatible, and the thin knit keeps the glove cool. The grip is what sets this glove apart. When you are holding a slippery piece of raw chicken, a wet potato, or a tomato that keeps sliding on the board, the foam nitrile palm holds it steady, which means less force on the knife and less chance of a slip. The 3D fit reduces bunching, so the glove feels closer to a second skin. Wash it gently, keep it away from high heat, and expect the coating to wear faster than a bare knit if it rubs against rough surfaces often.

Specs
– ASIN: B07ZNBXZR9
– Protection: EN388 Level 5, ANSI A5
– Material: HPPE knit with foam nitrile palm coating
– Fit: 3D comfort fit, sized, single pair
– Grip: Foam nitrile Power Grip palm, touchscreen fingertips
– Care: Thin and breathable, wash gently
– Best for: Wet and oily food, raw meat prep, and grip-heavy tasks

Which Glove Fits Your Cooking Style

If you use a mandoline or a grater most days, the Microplane glove is the natural pick, because it keeps the most feeling in your fingertips. If you want one pair for everyday cooking for the whole household, the NoCry Premium pair is the most versatile choice, with four sizes and a comfortable fit. If you tackle the hardest jobs in the kitchen, from cleaver work to tough squash, the Schwer ProGuard A9 gives the most protection of any glove here. If you want a simple, affordable glove for dry prep, the Dowellife pair does the job without extra features. And if grip is your main concern, especially with wet or oily food, the DEX FIT Cru553 holds food steadier than any other glove in this guide. Many cooks own two gloves: a thin one for the mandoline and a tougher one for heavy chopping.

Care and Maintenance

A cut-resistant glove only protects you if it is in good condition, so care matters. Wash the glove after each use, especially after raw meat or fish, and let it dry fully. Most of the gloves in this guide are machine washable, but check the care label and avoid high heat, which can weaken the fibers over time. Do not use bleach, because it can break down the glass fiber and steel thread yarns. Inspect the glove often for thin spots, frayed threads, or holes, especially at the fingertips and the palm, and replace it when you see damage. A glove with a hole no longer protects that finger, and frayed yarn may shed fibers into food. Store the glove in a dry place, away from direct sunlight. Finally, remember that a cut-resistant glove resists cuts, not punctures from a pointed tip, so pair it with good knife skills, a stable board, and full attention on the task.

FAQ

Do cut-resistant gloves work on a mandoline slicer?

Yes, a cut-resistant glove is one of the best tools for mandoline work. The glove lets you hold the food firmly and push it across the blade, including the final slices that are too small for a food holder. Pick a thin glove rated EN388 Level 5 or ANSI A4 to A5, because it keeps the feeling you need to judge thickness and pressure. Keep your fingers flat and behind the food, and never reach across the blade.

Can I wash cut-resistant gloves in the washing machine?

Most kitchen cut-resistant gloves are machine washable, and the five gloves in this guide can all be washed. Use a gentle cycle with mild detergent, and let the glove air dry rather than putting it in a hot dryer. Avoid bleach, because it can weaken glass fiber and steel thread yarns. Wash it after raw meat or fish, and before its first use.

Are cut-resistant gloves food safe?

Gloves made for kitchen use should be food-grade, and the gloves in this guide are made from food-safe materials. Look for listings that state food-grade or FDA-compliant materials before buying, and avoid industrial gloves that do not mention food contact. A coated palm should not flake into food, so inspect it often and replace the glove if it peels. Wash the glove before its first use and after each use to keep it clean.

How do I pick the right size?

Measure around your knuckles at the widest point, not counting the thumb, and compare that number to the size chart on the listing. A glove should fit snugly without squeezing, and your fingers should reach the end of each glove finger without extra fabric bunching at the tips. If you fall between two sizes, choose the smaller one for a closer fit, because a loose glove can slide on a knife handle. One-size gloves stretch to fit many hands, but a sized glove usually fits better.

As an Amazon Associate, I earn from qualifying purchases made through links on this page. This disclosure applies to the product links in this article.